 |
 |
| |
 |
English abbreviation and numeric is indicated to verify the product when placing an order. |
 |
The mass of the content, standardized by water or sand, is indicated in 'litter' to avoid error in the selection of the products depending on the usage. |
 |
The maximum dimension of the products, exterior and interior, is indicated in mm(millimeters) by [Length x Width x Height].
 |
 |
The maximum compression capacity, which will distort the individual products when pressure is applied at the rate of 10mm/min. |
 |
The optimal weight that the product can withstand when in usage (kg)
* Load : Water, Sand |
 |
The material used for the product is indicated with the abbreviation.
PP(Polypropylene), H/D PE(High Density Polypropylene), L/D PE(Low Density Polypropylene), and ABS(Acrylonytule Butadiene Styrene.) |
 |
Special remarks on the related components or parts for the product is indicated and such remark can be applied or removed upon customer's request. |
 |
Each product classified by sizes to help you find the product to meet the needs of the customers. The dimension chart is printed in length, weight, and hright for you to find it easily. |
 |
 |
 |
Trademark or company logo can be printed according to the usage of the product,
an effective way to improve image of an item and to advertise the company or a product.
Additional holes can be processed upon order for ventilation or cleaning purposes.
The cintents of the containers can easily be identified by attaching name cards and
makes it convenient.
 Caution : the standard tolerance dimension is +/-3mm at 20℃ and the standard
tolerance limit of capacity is +/-5% at 20℃
The product No., tolerance weight or dimension may change due to the
improvement of the quality. For special usage, please contact our company for
consultation and to check out our samples.
|
|
